The 1.3KΩ 1/4W resistor is a fixed resistor used for current limiting, voltage division, and setting bias points in electronic circuits. With a resistance value of 1,300 ohms and a power rating of 0.25 watts, it is ideal for various low-power applications.

Key Features:

• Resistance value: 1.3KΩ (1,300 ohms)
• Power rating: 1/4 watt (0.25W)
• Tolerance: ±5% (standard) or ±1% (precision)
• Type: Fixed resistor
• Lead type: Axial leads for through-hole mounting

Technical Specifications:

• Resistance: 1.3KΩ
• Power Rating: 0.25W
• Tolerance: ±5% (standard), ±1% (precision)
• Operating Temperature Range: -55°C to +155°C
• Temperature Coefficient: ±200 ppm/°C (typical)
• Package Type: Axial through-hole

Applications:

• Voltage dividers
• Biasing of active devices
• Signal conditioning
• Pull-up/pull-down resistors
• Filtering applications

Usage:

1. Determine the required resistance value and power rating for your circuit.
2. Solder the resistor into the circuit at the designated points.
3. Ensure proper handling to avoid damaging the resistor.
4. Verify connections and test the circuit.

Caution:

• Avoid exceeding the resistor’s power rating to prevent overheating and damage.
• Handle with care to avoid physical damage to the resistor’s leads and body.
• Ensure correct orientation and placement to maintain circuit integrity.

The 330KΩ 1/4W resistor is a fixed resistor used for current limiting, voltage division, and impedance matching in electronic circuits. With a resistance value of 330,000 ohms and a power rating of 0.25 watts, it is suitable for various low-power applications.

Key Features:

• Resistance value: 330KΩ (330,000 ohms)
• Power rating: 1/4 watt (0.25W)
• Tolerance: ±5% (standard) or ±1% (precision)
• Type: Fixed resistor
• Lead type: Axial leads for through-hole mounting

Technical Specifications:

• Resistance: 330KΩ
• Power Rating: 0.25W
• Tolerance: ±5% (standard), ±1% (precision)
• Operating Temperature Range: -55°C to +155°C
• Temperature Coefficient: ±200 ppm/°C (typical)
• Package Type: Axial through-hole

Applications:

• Voltage dividers
• Pull-up/pull-down resistors
• Biasing circuits
• Signal conditioning
• Filtering applications

Usage:

1. Identify the required resistance value and power rating for your circuit.
2. Insert and solder the resistor into the appropriate positions on the circuit board.
3. Check connections and ensure no short circuits or incorrect placements.
4. Test the circuit to verify proper operation.

Caution:

• Do not exceed the resistor’s power rating to avoid overheating.
• Handle with care to prevent damage to the resistor’s leads.
• Ensure correct placement and orientation in the circuit.

The 100KΩ 1/4W resistor is a fixed resistor used to manage current and voltage levels in electronic circuits. With a resistance of 100,000 ohms and a power rating of 0.25 watts, it is suitable for various low-power applications that require stable and precise resistance.

Key Features:

• Resistance value: 100KΩ (100,000 ohms)
• Power rating: 1/4 watt (0.25W)
• Tolerance: ±5% (standard) or ±1% (precision)
• Type: Fixed resistor
• Lead type: Axial leads for through-hole mounting

Technical Specifications:

• Resistance: 100KΩ
• Power Rating: 0.25W
• Tolerance: ±5% (standard), ±1% (precision)
• Operating Temperature Range: -55°C to +155°C
• Temperature Coefficient: ±200 ppm/°C (typical)
• Package Type: Axial through-hole

Applications:

• Voltage dividers
• Signal conditioning
• Biasing circuits
• Pull-up/pull-down resistors
• General electronic circuits

Usage:

1. Place the resistor in the circuit according to the design requirements.
2. Insert the leads into the circuit board and solder them in place.
3. Check connections to ensure proper placement and avoid short circuits.
4. Test the circuit to confirm that it operates correctly with the resistor in place.

Caution:

• Do not exceed the resistor’s power rating to avoid overheating.
• Handle with care to prevent damage to the resistor or its leads.
• Verify correct resistor placement and orientation in the circuit.

The 3.9KΩ 1/4W resistor is a fixed resistor with a resistance of 3,900 ohms. It is designed to handle up to 0.25 watts of power dissipation. This resistor is widely used in electronic circuits for controlling current and voltage levels.

Key Features:

• Resistance value: 3.9KΩ (3,900 ohms)
• Power rating: 1/4 watt (0.25W)
• Tolerance: ±5% (standard) or ±1% (precision)
• Type: Fixed resistor
• Lead type: Axial leads for through-hole mounting

Technical Specifications:

• Resistance: 3.9KΩ
• Power Rating: 0.25W
• Tolerance: ±5% (standard), ±1% (precision)
• Operating Temperature Range: -55°C to +155°C
• Temperature Coefficient: ±200 ppm/°C (typical)
• Package Type: Axial through-hole

Applications:

• Voltage dividers
• Signal filtering
• Biasing and load applications
• Current limiting
• General electronic circuits

Usage:

1. Insert the resistor into the designated position on the circuit board.
2. Insert the leads into the circuit board holes and solder them.
3. Ensure the resistor is properly oriented and connections are secure.
4. Test the circuit to confirm it operates as expected with the resistor installed.

Caution:

• Avoid exceeding the resistor’s power rating to prevent overheating or damage.
• Handle the resistor with care to avoid physical damage.
• Verify the resistor value and placement before powering the circuit.