A 10MΩ (megohms) 1/4 watt resistor is a high-value resistor used in electronic circuits for tasks that require high resistance. It can be used in applications such as signal processing, high-impedance measurements, and voltage divider circuits.

Key Features:

• Resistance: 10MΩ (10,000,000 ohms)
• Power Rating: 1/4W (0.25 watts)
• Tolerance: ±5% (commonly), with ±1% available for precision applications
• Temperature Coefficient: Typically ±100ppm/°C or ±200ppm/°C

Technical Specifications:

• Resistance: 10MΩ
• Power Rating: 1/4W (0.25 watts)
• Tolerance: ±5% (J), ±1% (F), depending on type
• Temperature Coefficient: ±100ppm/°C or ±200ppm/°C
• Operating Temperature Range: -55°C to +155°C
• Body Size: Typically through-hole with axial leads (1/4W size)
• Material: Metal film, carbon film, or other high-resistance materials

Applications:

• High-Impedance Circuits: Used in circuits requiring high resistance values.
• Voltage Dividers: Creates high resistance values in voltage divider circuits.
• Signal Processing: Used in signal conditioning and measurement circuits.
• Biasing: Provides precise resistance for setting bias conditions in electronic circuits.

Usage:

1. Placement: Insert the resistor into the appropriate slots on the circuit board.
2. Insertion: Pass the leads through the board’s holes or slots.
3. Soldering: Solder the leads to the circuit board and trim any excess.
4. Verification: Measure the resistor with a multimeter to ensure it meets the specified resistance.

Caution:

• Power Dissipation: Ensure the resistor’s power rating (0.25 watts) is not exceeded to avoid overheating.
• High Resistance: Be mindful of the resistor’s high resistance value and ensure proper handling to avoid damage.
• Handling: Handle the resistor carefully to avoid damage, especially given its high resistance value.

The 4.7MΩ 1/4W Resistor is a high-resistance, fixed resistor designed for use in electronic circuits that require a large resistance value. With a resistance of 4.7 megohms and a power rating of 0.25 watts, this resistor is ideal for high-impedance applications, voltage dividers, and current limiting in sensitive circuits.

Key Features:

• High resistance value of 4.7MΩ
• Power rating of 1/4 watt (0.25W)
• Tolerance of ±5%
• Axial leaded design for easy through-hole mounting
• Made from high-quality carbon film or metal film for stability and reliability
• Color-coded bands for quick and easy identification

Technical Specifications:

• Resistance: 4.7MΩ
• Power Rating: 1/4W (0.25W)
• Tolerance: ±5%
• Temperature Coefficient: ±200ppm/°C
• Operating Temperature Range: -55°C to +155°C
• Body Length: 6.3mm
• Body Diameter: 2.3mm
• Lead Diameter: 0.5mm
• Lead Length: 25mm (each side)
• Material: Carbon film or metal film

Applications:

• Voltage dividers in high-voltage circuits
• Current limiting in high-impedance applications
• Biasing resistors for high-impedance transistor circuits
• Signal conditioning in sensitive measurement circuits
• Filter networks in audio and RF circuits

Usage:

1. Determine the required resistance value for your circuit.
2. Identify the resistor value using the color-coded bands.
3. Insert the resistor leads into the appropriate holes on the PCB or breadboard.
4. Solder the leads in place if using a PCB, or ensure firm contact in a breadboard.
5. Trim excess lead length if necessary.

Caution:

• Ensure the resistor’s power rating is not exceeded to avoid overheating and potential failure.
• Verify the resistor’s value and tolerance before use in precision circuits.
• Handle with care to avoid damage to the resistor’s body and leads.

The 470KΩ 1/4W resistor is a fixed resistor used in electronic circuits to limit current, divide voltages, and perform various functions requiring a precise resistance value. With a power rating of 0.25 watts, it is suitable for a wide range of low-power applications.

Key Features:

• Resistance value: 470KΩ (470,000 ohms)
• Power rating: 1/4 watt (0.25W)
• Tolerance: ±5% (standard) or ±1% (precision)
• Type: Fixed resistor
• Lead type: Axial leads for through-hole mounting

Technical Specifications:

• Resistance: 470KΩ
• Power Rating: 0.25W
• Tolerance: ±5% (standard), ±1% (precision)
• Operating Temperature Range: -55°C to +155°C
• Temperature Coefficient: ±200 ppm/°C (typical)
• Package Type: Axial through-hole

Applications:

• Voltage dividers
• Biasing of active devices
• Signal conditioning
• Pull-up/pull-down resistors
• Filtering applications

Usage:

1. Determine the required resistance value and power rating for your circuit.
2. Solder the resistor into the circuit at the designated points.
3. Ensure proper handling to avoid damaging the resistor.
4. Verify connections and test the circuit.

Caution:

• Avoid exceeding the resistor’s power rating to prevent overheating and damage.
• Handle with care to avoid physical damage to the resistor’s leads and body.
• Ensure correct orientation and placement to maintain circuit integrity.

The 56KΩ 1/4W resistor is a fixed resistor used to limit current, divide voltages, and set bias points in electronic circuits. With a resistance value of 56,000 ohms and a power rating of 0.25 watts, it is suitable for various low-power applications.

Key Features:

• Resistance value: 56KΩ (56,000 ohms)
• Power rating: 1/4 watt (0.25W)
• Tolerance: ±5% (standard) or ±1% (precision)
• Type: Fixed resistor
• Lead type: Axial leads for through-hole mounting

Technical Specifications:

• Resistance: 56KΩ
• Power Rating: 0.25W
• Tolerance: ±5% (standard), ±1% (precision)
• Operating Temperature Range: -55°C to +155°C
• Temperature Coefficient: ±200 ppm/°C (typical)
• Package Type: Axial through-hole

Applications:

• Voltage dividers
• Biasing of active devices
• Signal conditioning
• Pull-up/pull-down resistors
• Filtering applications

Usage:

1. Determine the required resistance value and power rating for your circuit.
2. Solder the resistor into the circuit at the designated points.
3. Ensure proper handling to avoid damaging the resistor.
4. Verify connections and test the circuit.

Caution:

• Avoid exceeding the resistor’s power rating to prevent overheating and damage.
• Handle with care to avoid physical damage to the resistor’s leads and body.
• Ensure correct orientation and placement to maintain circuit integrity.