skydroid FPV 5.8G single antenna camera Receiver with OTG and USB

skydroid FPV 5.8G single antenna camera Receiver with OTG and USB

34,200.00

In stock

SKU: 2312 Category:

5.8G FPV Receiver UVC Video Downlink OTG Receiver

The UVC receiver needs to meet the following conditions:

1: Android phone

2: The phone supports OTG function

3: Qualcomm full range of CPUs can support

4: Kirin 950CPU and higher CPU

5: MediaTek X20CPU and higher CPU

6: Apple phone is not supported

 

Suit for android support UVC Use environment: open, without shelter, without interference

Frequency range: 5645MHz~5945MHz

Resolution: 640*480 30fps

Operating current: USB 5V

Suitable temperature range: -10~65 DEG C

In the mobile phone can be put into the double screen, glasses, experience from the perspective of the first person flight.

 

This is the newest version, add auto sweep and matc frequency, Graphical interface, Snow screen 0.1s Delay. Sail model of affection and dedication, support any flight control, 150 frequency points + automatic sweep frequency + spectrum instrument graphical interface + snow display +…… more simple and beautiful appearance. Original 150 point full frequency band scan 1500 times to calculate the intensity of RSSI, locking the most accurate frequency. We increase the channel to 150, the accuracy is 2m, 2m is also the highest, 2m basic can lock ninety-five percent signal points, which is the highest accuracy of the chip. With a high accuracy, then the abstract radio, this thing is the mobile spectrum instrument, you can detect the quality of the antenna, the transmitter to do horizontal comparison, the factorys electromagnetic environment testing, aircraft, etc.

 

PC usage:

1 . connect PC with USB line

2, (XP) open the camera (WIN7), install AMCP camera software, (WIN10) open the camera. Or MP ground station.

3, after the airborne map transmission device power, in the picture transmission, long press 3 seconds function keys, automatically search frequency points, and automatically lock the signal Zui strong frequency point.

 

Method for using AV display screen:

1, the use of data lines to connect, define the corresponding display AV interface, the receiver 5V power supply.

2, after the airborne map transmission device power, in the picture transmission, long press 3 seconds function keys, automatically search frequency points, and automatically lock the signal Zui strong frequency point.

1. usage The receiver connects the mobile phone with the data wire and gets the outdoor open space. The transmitter is pulled out more than 30 meters long and swept by frequency sweep button. Short press can fine tune. In order to ensure good results, please calibrate the signal before and after the highest and lowest values.

2. product characteristics Original 150 frequency, full frequency range, 1500 times scanning, calculate RSSI intensity, lock accurate frequency! We increase the channel to 150, the accuracy is 2m, and have 5.8G waveform scanning Add new functions to the 3 generation of receivers: 150 frequency points + automatic sweep frequency, frequency + spectrum instrument graphical interface + snow display +.. more concise and beautiful appearance……

 

Question 1: how far can you get the receiver?

Answer: This is only a receiver, and the distance is closely related to very many factors! 200MW flies more than 10 kilometers is, 2W flies several hundred meters also big crowd in. We\’re not going to discuss it! It\’s just a receiver. It\’s just on the phone. It won\’t be less because of the phone display

How much is the 2 receiver MW?

Answer: the receiver does not have radio frequency power statement: like ask your ear can make what big sound is same. These are ears… You can match our highly recommended 600MW transmitter. Can also be equipped with any of the 5.8G video transmitter on the market.

Question three: integrating OSD?

Answer: isn\’t OSD in the sky?!

Question 4 is it possible to pass data? What about 720p?

Answer: This is just a device for image transmission!! AV analog video signals are transmitted to the ground and then transferred to Android phones or pc..

 

Products introduction. This OTG Receiver support any quadcopter l!!!! Any aircraft!! This is a 5.8G receiver, traditionally passed to the screen, which is passed to the cell phone and can be passed to the screen at the same time.. Using mobile phone power supply to simplify wiring and structure!! Coupled with the powerful pocket FPV, this app embodies the VR flight!

Additional Information

Weight 0.086 kg

Reviews

There are no reviews yet.

Be the first to review “skydroid FPV 5.8G single antenna camera Receiver with OTG and USB”

0

TOP

X