TL074CN JFET four Op Amp

TL074CN JFET four Op Amp

550.00

Description:
The TL074CN is a quad operational amplifier (op-amp) featuring JFET input stages, known for their high input impedance and low input bias currents. This makes the TL074CN suitable for applications requiring accurate signal processing with minimal signal degradation.

Key Features:

  • Quad operational amplifier in a single package
  • JFET input stages provide high input impedance
  • Low input bias current: 30 pA (typical)
  • Low offset voltage: 3 mV (max)
  • Wide bandwidth: 3 MHz
  • Low noise density: 18 nV/√Hz at 1 kHz
  • Common-Mode Rejection Ratio (CMRR): 100 dB (typical)
  • Single supply operation: 3V to 18V or dual supply operation: ±1.5V to ±9V

Technical Specifications:

  • Package Type: DIP-14
  • Supply Voltage Range: ±1.5V to ±9V (dual supply), 3V to 18V (single supply)
  • Input Voltage Range: ±15V (differential)
  • Input Offset Current: 5 pA (typical)
  • Power Consumption: 1.4 mA per amplifier
  • Operating Temperature Range: 0°C to +70°C
  • Dimensions: 19.3 mm x 6.35 mm x 3.3 mm
  • Weight: 1.02 g

Applications:

  • Audio Processing: Used in audio preamplifiers, equalizers, and mixers.
  • Signal Conditioning: Suitable for instrumentation and sensor signal conditioning.
  • Active Filters: Used in active filter circuits for frequency selection and signal processing.
  • Data Acquisition Systems: Interfaces with sensors and ADCs for accurate data acquisition.
  • Control Systems: Used in control and feedback systems for amplification and signal processing.

Datasheet:
For detailed technical information, refer to the TL074CN Datasheet.

 

In stock

SKU: 1514 Category:

The TL074CN JFET-input operational amplifiers incorporate well-matched, high-voltage JFETand bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates,low-input bias and offset currents, and low offset-voltage temperature coefficient. The lowharmonic distortion and low noise make the TL074CN series ideally suited for high-fidelity and audiopre-amplifier applications. The TL074CN device has offset pins to support external input offsetcorrection.

 

  • Low Power Consumption
  • Wide Common-Mode and Differential Voltage Ranges
  • Low Input Bias and Offset Currents
  • Output Short-Circuit Protection
  • Low Total Harmonic Distortion: 0.003% (Typical)
  • Low Noise
    Vn = 18 nV/√Hz (Typical) at f = 1 kHz
  • High-Input Impedance: JFET Input Stage
  • Internal Frequency Compensation
  • Latch-Up-Free Operation
  • High Slew Rate: 13 V/µs (Typical)
  • Common-Mode Input Voltage Range
    Includes VCC+

Additional Information

Weight 0.0012 kg

Reviews

There are no reviews yet.

Be the first to review “TL074CN JFET four Op Amp”

0

TOP

X