The AD623 is an integrated single supply instrumentation amplifier that delivers rail-to-rail output swing on a single supply (+3 V to +12 V supplies). The AD623 offers superior user flexibility by allowing single gain set resistor programming, and conforming to the 8-lead industry standard pinout configuration. With no external resistor, the AD623 is configured for unity gain (G = 1) and with an external resistor, the AD623 can be programmed for gains up to 1,000.
Features and Specifications
- Input Range: 0.5VCC (i.e.the voltage between S+/S- is less than half of the power supply voltage)
- Output Range: + – VCC (rail to rail)
- Magnification: 2-1000 times(adjustable with potentiometer)
- Power Consumption: 150uA(typical)/650uA(maximum)
- Power Supply: 3-5.5V
- Gain Accuracy: 0.35% (G>2) 0.10% (G=2)
- Input Offset Voltage: 100-200uV
- Input Offset Drift: 1uv/℃
- Common Mode Rejection Ratio: 90db
- Gain Bandwidth: 800KHZ
- PCB Size: 40*23mm/1.57*0.9in
Applications
Â
- Low Power Medical Instrumentation
- Transducer Interface ,Thermocouple Amplifier
- Industrial Process Controls
- Difference Amplifier
Â
NB:
It is recommended to test the baby with a smaller magnification (eg 50/100 times) and then adjust to the desired multiple. Adjust the A++ knob clockwise to increase the magnification (up to 1000 times). When the maximum is adjusted, you can hear a slight click from the potentiometer, indicating that it has been adjusted to the end. It is also possible to use a resistor to fix the magnification so that the amplification value will be more stable.