YP-01 USB to TTL converter module PL2303
₦2,000.00
The YP-01 USB to TTL Converter Module utilizes the PL2303 chip to facilitate serial communication between a USB port and TTL-level serial devices. It provides a convenient way to interface microcontrollers, sensors, and other TTL serial devices with a computer via USB. The module is widely used in programming and debugging microcontrollers and for data transfer applications.
Key Features:
- Converts USB signals to TTL serial signals (and vice versa)
- Compatible with the PL2303 chip for reliable USB-to-serial conversion
- Supports baud rates up to 6 Mbps
- Easy-to-use with no additional drivers required on most operating systems
- Compact and lightweight design
- Provides TX and RX LED indicators for signal activity
Technical Specifications:
- Chipset: PL2303HX
- Interface: USB (Type-A connector) to TTL serial (TX, RX, GND)
- Baud Rate: Up to 6 Mbps
- Operating Voltage: 3.3V or 5V (depends on module version)
- Current Consumption: Typically around 30mA (varies by usage)
- Dimensions: Approximately 35mm x 20mm (length x width)
- Indicators: TX and RX LEDs for signal activity
- Operating Temperature Range: -40°C to +85°C (depends on chip and module design)
Applications:
- Microcontroller Programming: Used to program and debug microcontrollers through serial communication.
- Data Transfer: Facilitates communication between computers and TTL-level devices for data exchange.
- Embedded Systems Development: Provides an interface for testing and developing embedded systems.
- Serial Device Communication: Connects TTL serial devices to USB ports for various applications.
Usage:
- Connect the YP-01 module to a USB port on your computer.
- Connect the TTL serial device’s TX pin to the module’s RX pin and the device’s RX pin to the module’s TX pin.
- Install necessary drivers if required (usually automatically installed on most operating systems).
- Configure the serial communication settings (baud rate, parity, etc.) in your terminal software or application.
- Begin communication or programming with your TTL serial device.
Caution:
- Ensure proper voltage levels are matched between the TTL device and the module to avoid damage.
- Check the module’s documentation for specific driver installation requirements.
- Avoid short circuits or incorrect connections to prevent damage to the module or connected devices.
Datasheet:
For detailed technical specifications, refer to the PL2303 Datasheet.
In stock