PIC KIT2

The PICkit 2 is a low-cost in-circuit debugger and programmer developed by Microchip Technology for programming and debugging PIC microcontrollers. It provides an easy and efficient way to develop, program, and test microcontroller-based projects. The PICkit 2 supports a wide range of PIC microcontrollers and offers a user-friendly interface for seamless integration with the MPLAB IDE.

Key Features:

• Supports a wide range of PIC microcontrollers
• In-circuit programming and debugging capabilities
• USB interface for connection to the development PC
• User-friendly interface with MPLAB IDE integration
• Low-cost and portable design
• Can be used as a programmer, debugger, and logic tool
• Built-in over-voltage/short-circuit protection

Technical Specifications:

• Supported Devices: Wide range of PIC microcontrollers
• Interface: USB 2.0
• Programming Voltage: 2.0V to 5.5V
• Operating Voltage: 5V (from USB)
• Current Consumption: Typically 20mA to 25mA
• Dimensions: Approximately 75mm x 25mm x 11mm (varies slightly by manufacturer)
• Operating Temperature Range: 0°C to +70°C

Applications:

• Microcontroller development and debugging
• Programming and testing of embedded systems
• Educational and learning projects
• Small-scale production programming
• Prototyping and hobbyist projects

Usage:

1. Connect the PICkit 2 to your PC via the USB interface and install the necessary software (MPLAB IDE or compatible).
2. Connect the PIC microcontroller to the PICkit 2 using the ICSP (In-Circuit Serial Programming) interface.
3. Use the MPLAB IDE to load the firmware or code into the microcontroller, configure debugging settings, and start programming.
4. Verify the programming and debug the microcontroller as needed using the PICkit 2.

Caution:

• Ensure the correct microcontroller type and settings are selected in the software to avoid programming errors.
• Handle the PICkit 2 and microcontroller carefully to avoid physical damage.
• Verify power supply and connections before starting the programming process to prevent damage to the programmer or microcontroller.

Datasheet:
For detailed technical specifications, refer to the PICkit 2 User Guide.