- You have no items in your shopping cart
- Subtotal: ₦0.00
XY-WJ01 one way relay delay timmer switch
₦8,700.00
Description:
A compact module combining a programmable timer with an SPST relay for timed control of external devices. Activates/deactivates the relay after a set delay upon receiving a trigger signal.
Key Features:
- Controls one external device via the built-in SPST relay.
- Programmable delay to activate/deactivate the relay.
- Supports various trigger modes (button press, voltage level change, external switching signal).
- Wide DC voltage range (typically 6V to 30V).
- LCD display for configuration, monitoring delay, and viewing operating mode.
- Sleep mode for power conservation (dims display during inactivity).
- Memory function retains programmed settings after power cycles.
Technical Specifications (Refer to Datasheet):
- Operating Voltage: Typically 6V to 30V DC (exact range varies)
- Timing Range: Usually 0.01 seconds to 9999 minutes (specific range varies)
- Relay Output: SPST relay, typically rated for 30V DC at 10A or 220V AC at 5A (check datasheet)
- Display: LCD screen
- Dimensions: Refer to datasheet for specific model dimensions
Applications:
- Time-delayed control of lights, motors, or other devices.
- Automatic shutoff systems.
- Simple automation projects with timed relay activation.
- Educational tool for learning about timers and relay control.
Datasheet:
Consult the XY-WJ01 module datasheet for detailed technical information. XY-WJ01 datasheet
In stock
Material: ABS + electronic components
Working voltage: 6-30 V power supply
Trigger signal source: High-level touch (3.0V~24V), low-level trigger (0.0V~0.2V), switching quantity control (passive switch). 3: Output capacity: can control devices within 30v 10A or within 220v5A
Quiescent current: 15 mA
Working current: 50 mA
Service life: More than 100,000 times
Working temperature: -40~85 ° C
Weight: 45 g
Size: 7.1*3.9*2.5 cm (length, width and height)
Package list: 1*1pcs
Principle: Time relay
Protective features: Sealed
Liaison load: Low power
Power mode: DC
Features:
1. With liquid crystal display, the current mode and parameters are clear at a glance, very clear, simple and practical;
2. Support button trigger control, high and low-level trigger, switch quantity control, suitable for most occasions;
3. Wide voltage supply (6~30V), very convenient to use;
4. Support UART data upload and parameter setting;
5. One-button pause function with reverse connection protection, the reverse connection does not burn;
6. Added sleep mode. After enabling, there is no operation for about 5 minutes, and the LCD backlight is automatically turned off; any button wakes up;
7. Different OP, CL, LOP parameters can be set. These parameters are independent of each other and saved separately.
8. All setting parameters are automatically saved after power-off. Product parameters:
9. With optocoupler isolation, enhance anti-interference ability, industrial grade circuit board, set parameters to remember forever after power off. Scope of application: small appliance control, MCU development and so on.
