- You have no items in your shopping cart
- Subtotal: ₦0.00
SN65LBC184 transceiver
₦400.00
Description:
The SN65LBC184 is a differential bus transceiver designed for bidirectional data communication on multipoint bus transmission lines. It combines a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5V power supply. The device is designed to withstand harsh environments and is suitable for industrial applications.
Key Features:
- Differential driver and receiver pair
- High-speed operation: up to 30 Mbps
- Wide common-mode voltage range: -7V to +12V
- Low power consumption
- Thermal shutdown protection
- Short-circuit protection
- Open-circuit fail-safe receiver
- Bus-pin ESD protection exceeding 12 kV HBM
Technical Specifications:
- Package Type: SOIC-8, PDIP-8
- Supply Voltage Range: 4.75V to 5.25V
- Data Rate: up to 30 Mbps
- Differential Output Voltage: 1.5V to 5V
- Common-Mode Voltage Range: -7V to +12V
- Operating Temperature Range: -40°C to +85°C
- Dimensions (PDIP-8): 10.16 mm x 6.35 mm x 3.81 mm
- Weight: 0.28 g
Applications:
- Industrial Automation: Used in factory automation and control systems for robust data communication.
- Building Automation: Facilitates communication between devices in building control systems.
- Telecommunications: Suitable for long-distance communication in telecommunication networks.
- Data Acquisition Systems: Provides reliable data transfer in sensor networks and data acquisition systems.
- Automotive Applications: Used in vehicle communication systems for robust data transfer.
Datasheet:
For detailed technical information, refer to the SN65LBC184 Datasheet.
Category: Transceivers / Data Communication ICs
In stock
The SN75LBC184 and SN65LBC184 devices are
differential data line transceivers in the trade-standard
footprint of the SN75176 with built-in protection
against high-energy noise transients. This feature
provides a substantial increase in reliability for better
immunity to noise transients coupled to the data
cable over most existing devices. Use of these
circuits provides a reliable low-cost direct-coupled
(with no isolation transformer) data line interface
without requiring any external components.
The SN75LBC184 and SN65LBC184 can withstand
overvoltage transients of 400-W peak (typical). The
conventional combination wave called out in IEC
61000-4-5 simulates the overvoltage transient and
models a unidirectional surge caused by overvoltages
from switching and secondary lightning transients
•1 Integrated Transient Voltage Suppression
• ESD Protection for Bus Terminals Exceeds:
±30 kV IEC 61000-4-2, Contact Discharge
±15 kV IEC 61000-4-2, Air-Gap Discharge
±15 kV EIA/JEDEC Human Body Model
• Circuit Damage Protection of 400-W Peak
(Typical) Per IEC 61000-4-5
• Controlled Driver Output-Voltage Slew Rates
Allow Longer Cable Stub Lengths
• 250-kbps in Electrically Noisy Environments
• Open-Circuit Fail-Safe Receiver Design
• 1/4 Unit Load Allows for 128 Devices Connected
on Bus
• Thermal Shutdown Protection
• Power-Up and Power-Down Glitch Protection
• Each Transceiver Meets or Exceeds the
Requirements of TIA/EIA-485 (RS-485) and
ISO/IEC 8482:1993(E) Standards
• Low Disabled Supply Current 300 μA Maximum
• Pin Compatible With SN75176
Additional Information
| Weight | 0.000733 kg |
|---|
Be the first to review “SN65LBC184 transceiver”
You must be <a href="https://hub360.com.ng/my-account-3/">logged in</a> to post a review.
Reviews
There are no reviews yet.