- You have no items in your shopping cart
- Subtotal: ₦0.00
GY-LSM303C LIS3MDL 3 axis magnetometer
₦3,900.00
Description:
The GY-LSM303C LIS3MDL 3-Axis Magnetometer is a high-performance magnetic sensor designed for precise detection of magnetic fields in three dimensions. It integrates the LIS3MDL sensor, known for its high sensitivity and accuracy. This module is ideal for applications in navigation, orientation detection, and electronic compasses.
Key Features:
- High-performance LIS3MDL magnetometer: Provides accurate 3-axis magnetic field measurements.
- Wide measurement range: ±4/±8/±12/±16 gauss selectable range for versatile applications.
- I2C and SPI interfaces: Supports easy integration with various microcontrollers and development platforms.
- Low power consumption: Energy-efficient operation suitable for battery-powered projects.
- High resolution: 16-bit data output for precise magnetic field detection.
- Compact design: Small form factor for easy integration into different projects.
Technical Specifications:
- Sensor: LIS3MDL
- Measurement Range: ±4/±8/±12/±16 gauss (selectable)
- Output Data Rate: 0.625 Hz to 80 Hz
- Interface: I2C (default address: 0x1E) and SPI
- Operating Voltage: 2.4V to 3.6V
- Power Consumption: Low power mode and ultra-low power mode
- Resolution: 16-bit
- Dimensions: Compact module size (refer to datasheet for exact dimensions)
- Weight: Lightweight design
Applications:
- Navigation systems: Enhances GPS accuracy by providing magnetic field data.
- Orientation detection: Used in devices requiring precise orientation sensing.
- Electronic compasses: Ideal for creating digital compasses with high accuracy.
- Robotics: Provides magnetic field data for robot navigation and positioning.
- Consumer electronics: Used in smartphones, tablets, and other portable devices for orientation sensing.
Datasheet:
For detailed technical information and specifications, please refer to the LIS3MDL datasheet
In stock
| The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as an eCompass device. Due to the IC housing a 3-axis accelerometer and a 3-axis magnetometer combined with its low cost, the LSM303C was perfect for us to create this small breakout board just for you! Each LSM303C Breakout has been designed to be super-flexible and can be configured specifically for many applications. The LSM303C Breakout can be configured to generate an interrupt signal for free-fall, motion detection and magnetic field detection!
The range of each sensor on the LSM303C is configurable: the accelerometer’s scale can be set to ±2g, ±4g, ±6g, or ±8g, while the magnetometer has full-scale range of ±16 gauss, and supports I2C and SPI communication. Each pin has been broken out on the LSM303C, with 10 plated through hole connections featuring power and I2C and SPI functionality, interrupt outputs, and accelerometer and magnetometer data out. Please keep in mind that the LSM303C is a 2.5V device so supplying voltages greater than ~4.8V can permanently damage the IC. As long as your Arduino has a 3.3V supply output, you shouldn’t need any extra level shifting. Features 2.3 magnetic field channels and 3 acceleration channels 5.±16 gauss magnetic full scale
|
