This dual shaft 12v DC motor is no different from the normal 12v DC except for a second shaft coming out from the bottom of the motor The dual shaft can be used in a number of ways. One example is to drive 2 applications on either side of the motor. A second (and by far the most common) is to use the rear shaft to mount an encoder, brake or hall sensor array in order to be able to set up a closed loop speed control system. The starting current should be more than 10A. It is recommended to use a switching power supply or a DC power supply such as a battery.
Technical Specifications:
- Motor model: 795 motor
- Operating voltage: DC 12V-24V
- no-load current: 1.1A
- Shaft Diameter: 5mm
- No-load speed: 11000-12000 rpm at 12V (D-axis 24V)
- Load speed: 12V 6000 rpm, 24V 12000 rpm
- step height: 4.5mm
- step diameter: 17.5mm
- motor diameter: 42mm
- motor length (without shaft): 70.5mm
- output shaft length: 16mm
- Shaft diameter: 5mm
- Tail step height: about 14.5mm
- Tail exit shaft length: about 3mm
- Mounting hole pitch: about 29mm,
- Mounting hole size: M4
- weight: 370g