795 Double shaft 12vdc motor

This dual shaft 12v DC motor is no different from the normal 12v DC except for a second shaft coming out from the bottom of the motor The dual shaft can be used in a number of ways. One example is to drive 2 applications on either side of the motor. A second (and by far the most common) is to use the rear shaft to mount an encoder, brake or hall sensor array in order to be able to set up a closed loop speed control system. The starting current should be more than 10A. It is recommended to use a switching power supply or a DC power supply such as a battery.

Technical Specifications:

• Motor model: 795 motor
• Operating voltage: DC 12V-24V
• no-load current: 1.1A
• Shaft Diameter: 5mm
• No-load speed: 11000-12000 rpm at 12V (D-axis 24V)
• Load speed: 12V 6000 rpm, 24V 12000 rpm
• step height: 4.5mm
• step diameter: 17.5mm
• motor diameter: 42mm
• motor length (without shaft): 70.5mm
• output shaft length: 16mm
• Shaft diameter: 5mm
• Tail step height: about 14.5mm
• Tail exit shaft length: about 3mm
• Mounting hole pitch: about 29mm,
• Mounting hole size: M4
• weight: 370g