3s 11.1v 12v 12.6v 10A lipo battery protection board

This 3s 11.1v 12v 12.6v 10A lithium battery protection board (for 3 18650 batteries or polymer lithium battery series combination)  is rated 10.8V (rated voltage for polymer battery), 11.1V (18650 or 3.7V lithium battery rated voltage) 12.6V (lithium battery is fully charged), Discharge 10A (referring to the maximum dis-charge current limit) Lithium battery protection board Comes with: over-charge, over-discharge, over-current, short circuit protection for 18650 lithium battery pack.

Note:

• This protection board can not be used for ion polymer battery, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, 2 pieces and 24V series, 775 (4A) or above motor, 1W fisheye LED lamp.
• The power range described applies to the following products:Massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, and other products.
• For discharge products above 3A, the battery discharge rate should be more than 3C.
• Magnification calculation formula: 1C rate battery, 2000 capacity is equal to 2AH*1=2A upper limit working current.3C rate battery, 2000 capacity is equal to 2AH*3=6A upper limit working current.
• In strict accordance with this wiring 0V (B-), 3.7V (B1), 7.4V (B2), 11.1V (B +), do not intentionally short circuit!
• After the line is connected, it needs to be charged before it will have output.
• When connecting 3 sets of batteries in series, please ensure that the voltage of each set of batteries is the same. If they are different, please recharge each set of batteries separately and use them in series. During the discharge test, the voltage should drops.
• Do not mix good battery and poor battery! The closer the capacity/internal resistance of the 3 batteries is, the better! (The effect of 2 good batteries + 1 poor battery) = 3 use of poor battery).

Technical Specifications:

• Model: HX-3S-FL10-A
• Input voltage: 12.6V
• Size: 53*17*4.0mm
• Maximum operating current: 5-8A
• Storage conditions: -40 — +80 ℃
• Quiescent current: less than 30uA
• Instantaneous current: 11-13A
• Working temperature: -40—+50°C
• Working current: 0-8A
• Effective life: more than 30,000 hours
• Internal resistance: less than 100mΩ
• Maximum instantaneous current: 9-10A
• Operating temperature: -40 — +50 ℃
• Over-charge voltage range: 4.25-4.35v ± 0.05v
• Over-discharge voltage range: 2.3-3.0v ± 0.05v
• Short circuit protection: protection, delay self-recovery.
• the components are 2110-CB protection chip and 2 AOD472*;