10KΩ 2W resistor

The 10KΩ 2W resistor is a fixed-value resistor designed to handle higher power dissipation compared to standard resistors. It is used to limit current, divide voltage, and stabilize circuits in various electronic applications. This resistor is suitable for use in power supplies, audio equipment, and other applications where robust performance and reliability are required.

Key Features:

• Fixed resistance value of 10KΩ
• Power rating of 2 watts
• Flame-resistant coating for enhanced safety
• High reliability and thermal stability
• Axial leads for straightforward mounting on printed circuit boards (PCBs)
• Suitable for power handling and precision applications

Technical Specifications:

• Resistance Value: 10KΩ
• Power Rating: 2W
• Tolerance: ±5% (J) or ±1% (F), depending on the model
• Temperature Coefficient: ±200 ppm/°C
• Operating Temperature Range: -55°C to +155°C
• Body Size: Approx. 4.0mm (Diameter) x 16.5mm (Length)
• Lead Diameter: Approx. 0.6mm
• Material: Metal oxide film or carbon film
• Maximum Working Voltage: 500V
• Maximum Overload Voltage: 800V

Applications:

• Power Supplies: Used in power supply circuits for current limiting and voltage division.
• Audio Equipment: Applied in audio equipment for signal processing and tone control.
• Voltage Dividers: Ideal for voltage divider circuits in various electronic applications.
• Load Resistors: Suitable for use as load resistors in testing and measurement setups.
• General Electronics: Used in a variety of electronic devices and circuits where higher power handling is needed.

Usage:

1. Identify the resistor’s resistance value and power rating by reading the color code or label.
2. Solder the resistor onto the PCB or integrate it into the circuit using the axial leads.
3. Ensure the resistor is placed in a location that allows for proper heat dissipation.
4. Verify the resistor’s connections and test the circuit to ensure correct operation.

Caution:

• Do not exceed the resistor’s maximum power rating to prevent overheating and potential failure.
• Ensure adequate ventilation and heat dissipation in high-power applications.
• Handle with care to avoid damaging the resistor’s leads and coating.
• Confirm the resistor’s resistance value and tolerance before use in precision circuits.