0-40KPa air and water pressure sensor module

This module adopts high precision AD sampling chip and 0-40KPa air pressure sensor.
It can connect 2.5mm soft tube and detect the water level and other air pressure.
Adopting 5K OHM resistor bridge sensor, it has a compact size and easy to install.
Barometric Pressure Sensor Module only, other accessories demo in the picture is not included!

Technical Specifications:

Voltage rating : 3.3 – 5V.

Current rating: 1.5mA.

Gain: 32/64/128dB

Communication protocol: Serial.

Pressure range: 0-40 kPa

Pinout

This is a brief description of how to connect this board to a microcontroller, however proper research is still required to avoid damaging the sensor:

VCC  – Connect to 3.3 or 5v output pin.

OUT – Connect to a digital Pin.

SCK – Connect to another digital pin on your microcontroller.

GND –  Connect pin to Ground on your microcontroller.

Application

It is can be used in your project to detect air pressure and water level.

Additional information

Dimension: 18x13mm/0.71×0.51inch(2mm fixing hole)

Weight: 13g

Color: Red