- You have no items in your shopping cart
- Subtotal: ₦0.00
SN75LBC184P transceiver
₦300.00
Description:
The SN75LBC184P is a differential bus transceiver designed for use in balanced multipoint bus transmission at data rates up to 10 Mbps. This device features a wide common-mode voltage range and high noise immunity, making it suitable for industrial and telecommunications applications. It is designed to meet the requirements of both TIA/EIA-485 (RS-485) and ISO 8482:1987(E) standards.
Key Features:
- Differential driver and receiver pair
- Data rates up to 10 Mbps
- Wide common-mode voltage range: -7V to +12V
- High input impedance: 12 kΩ (minimum)
- Low power consumption
- High noise immunity
- Thermal shutdown protection
- Driver short-circuit protection
- Meets or exceeds the requirements of TIA/EIA-485 (RS-485) and ISO 8482:1987(E)
- TTL-compatible inputs and outputs
Technical Specifications:
- Package Type: PDIP-8
- Supply Voltage: 4.75V to 5.25V
- Operating Temperature Range: 0°C to +70°C
- Data Rate: Up to 10 Mbps
- Common-Mode Voltage Range: -7V to +12V
- Driver Output Voltage: ±12V
- Receiver Input Sensitivity: ±200 mV
- Dimensions: 9.81 mm x 6.35 mm x 3.94 mm
- Weight: 0.5 g
Applications:
- Industrial Automation: Reliable communication in factory and process automation.
- Telecommunications: Used in telecommunication networks for data transmission.
- Building Automation: Communication in building management and control systems.
- Embedded Systems: Suitable for microcontroller-based communication interfaces.
- Security Systems: Data transmission in security and surveillance systems.
- Remote Data Acquisition: Transceiver for remote sensor data collection and monitoring.
Datasheet:
For detailed technical information, refer to the SN75LBC184P Datasheet.
In stock
The SN75LBC184P is a Differential Data Line Transceiver in the trade-standard footprint of the SN75176 with built-in protection against high-energy noise transients. This feature provides a substantial increase in reliability for better immunity to noise transients coupled to the data cable over most existing devices. Use of these circuits provides a reliable low-cost direct-coupled (with no isolation transformer) data line interface without requiring any external components. The SN75LBC184P can withstand overvoltage transients of 400W peak (typical). The conventional combination wave called out in IEC 61000-4-5 simulates the overvoltage transient and models a unidirectional surge caused by overvoltage from switching and secondary lightning transients. ESD protection for bus terminals exceeds, ±30kV IEC 61000-4-2 contact discharge, ±15kV IEC 61000-4-2 air-gap discharge and ±15kV EIA/JEDEC human body model.
- Integrated transient voltage suppression
- Circuit damage protection of 400W peak (typical) per IEC 61000-4-5
- Controlled driver output-voltage slew rates allow longer cable stub lengths
- 250kbps in electrically noisy environments
- Open-circuit fail-safe receiver design
- 1/4 Unit load allows for 128 devices connected on bus
- Thermal shutdown protection
- Power-up and power-down glitch protection
- Each transceiver meets/exceeds requirements of TIA/EIA-485 (RS-485) & ISO/IEC 8482:1993(E) standards
- 300µA Maximum low disabled supply current
Be the first to review “SN75LBC184P transceiver”
You must be <a href="http://hub360.com.ng/my-account-3/">logged in</a> to post a review.
Reviews
There are no reviews yet.