PCA82C250N driver transceiver

PCA82C250N driver transceiver

1,600.00

Description:
The PCA82C250N is a high-speed CAN (Controller Area Network) transceiver that provides the interface between a CAN controller and the physical bus. It is designed for high-speed CAN communication and is suitable for use in automotive, industrial, and other applications requiring robust communication over long distances and in noisy environments.

Key Features:

  • High-speed CAN transceiver for data rates up to 1 Mbps
  • Fully compatible with the ISO 11898 standard
  • Differential receiver with high noise immunity
  • Thermal protection and short-circuit protection
  • Low-power standby mode
  • Transmit data (TxD) dominant timeout function
  • Bus pins protected against transients in an automotive environment
  • Fully compatible with 3.3V and 5V logic levels

Technical Specifications:

  • Package Type: DIP-8, SO-8
  • Supply Voltage Range: 4.75V to 5.25V
  • CANH, CANL Voltage Range: -36V to +36V
  • Operating Temperature Range: -40°C to +125°C
  • Data Rate: Up to 1 Mbps
  • Standby Current: 10 µA (typical)
  • Dimensions (DIP-8): 10.16 mm x 6.35 mm x 3.3 mm
  • Weight: 0.4 g

Applications:

  • Automotive: Used in automotive systems for robust CAN communication between ECUs.
  • Industrial Automation: Facilitates communication in industrial control systems and automation.
  • Medical Equipment: Provides reliable data communication in medical devices and systems.
  • Building Automation: Used in building management systems for monitoring and control.
  • Robotics: Enables communication in robotic control systems and networks.

Datasheet:
For detailed technical information, refer to the PCA82C250N Datasheet.

Category: Communication ICs / CAN Transceivers

In stock

SKU: 1993 Category:

The PCA82C250/251 transceiver products basically provide interfacing between a protocol controller and a physical transmission line. They are designed to transmit data with a bit rate of up to 1 Mbit/s over a two-wire differential voltage bus line as described in the ISO 11898 standard. Their general features are listed in the data sheets
(see [1] and [2]).
Both devices are designed for the use in CAN bus systems with a nominal supply voltage of 12 V (PCA82C250)
and 24 V (PCA82C251) respectively. They are functionally identical and can be used in automotive and general
industrial applications according to the relevant standards e.g. the ISO 11898 standard [3] and the DeviceNetTM
Specification [5]. Both the PCA82C250 and the PCA82C251 can communicate to one another in one network.
Moreover they are pin- & function-compatible i.e. they can be used with identical printed circuit boards

Reviews

There are no reviews yet.

Be the first to review “PCA82C250N driver transceiver”

0

TOP

X