1uH inductor

A 1µH inductor is a passive electronic component designed to store energy in a magnetic field when electrical current flows through it. This low-value inductor is commonly used in high-frequency applications, such as RF circuits, signal filtering, and impedance matching.

Key Features:

• Inductance value of 1µH
• Low DC resistance for efficient performance
• High current handling capability
• Shielded or unshielded options available
• Compact and durable design

Technical Specifications:

• Inductance: 1µH
• Tolerance: ±10% (typical)
• DC Resistance (DCR): Typically around 0.01 to 0.1 ohm, depending on the specific model
• Rated Current: Typically around 1A to 10A (depending on specific inductor model)
• Self-Resonant Frequency: Typically in the range of 50MHz to 500MHz
• Operating Temperature Range: -40°C to +125°C
• Core Material: Ferrite or iron powder (depends on specific inductor model)
• Package Type: Radial leaded, axial leaded, or surface-mount (depends on specific inductor model)
• Dimensions: Varies by specific model, typically around 3mm x 3mm x 2mm (for surface-mount types)

Applications:

• High-Frequency Circuits: Used in RF circuits for impedance matching and signal filtering.
• Power Supply Circuits: Used in DC-DC converters and power management circuits.
• Filtering: Helps in removing noise and ripple in high-frequency power supply lines.
• Signal Processing: Used in signal processing circuits for various filtering applications.
• Chokes: Acts as a choke in various high-frequency circuits to block AC while allowing DC to pass.
• General Purpose: Suitable for various electronic circuits requiring a 1µH inductance.

Usage:

1. Identify the correct placement for the inductor in your circuit based on the schematic.
2. Ensure the inductor’s current rating matches the circuit’s requirements.
3. Solder the inductor into place, ensuring secure connections to prevent signal loss.
4. Test the circuit to verify the inductor is functioning as expected.

Caution:

• Ensure the inductor’s current rating is not exceeded to prevent overheating.
• Handle with care to avoid damaging the inductor or its leads.
• Verify the inductor’s specifications match the requirements of your application.

Datasheet:
For detailed technical specifications, refer to the datasheet provided by the specific manufacturer of the 1µH inductor.