Raspberry Pi 3 interfacing with 1602 LCD Display

hi guys, welcome to this tutorial. It’s safe to say 80% of the projects you will do with the raspberry pi will be without a screen due to its effectiveness as a server, or at most, the projects will be with a touch screen or a monitor, so this tutorial could be said to exist for those 20% projects for which we may need the 1602 LCD Display. In this tutorial, I will show you […]

Raspberry Pi 3 UART Communication with NEO 6mv2 Gps Module (Part B): Email Notification

Hi guys, Last tutorial, we got the data from the GPS module and did all the setup necessary to allow the PI communicate via Serial as we disabled the Mini UART and enabled the PL011 UART. For this second part of the tutorial, we will learn how to send data from the Pi to an email address and for this tutorial, we will be sending the GPS location data converted to a link, so the […]

Raspberry Pi 3 UART Communication with NEO 6mv2 Gps Module (Part A)

hi guys, today we will focus on doing something a lot of people have found difficult to do with the raspberry pi 3; Connecting components that use the UART communication mode, to the raspberry pi 3. The SoCs used on the Raspberry Pis have two built-in UARTs, a PL011  and a mini UART. They are implemented using different hardware blocks, so they have slightly different characteristics and capabilities. From the Raspberry pi 3 and pi zero(the […]

Raspberry Pi Tutorial : {Episode 3} Setting up and running in Headless Mode (Part B)

Hi guys, welcome to today’s tutorial, I will be showing you how to view the raspberry pi GUI on your windows 10 computer. I recommend you go through the part A of this episode if you haven’t before going through this. The last tutorial I showed you how to SSH into your raspberry pi using a windows 10 computer, but hey! Not everyone likes to work on the terminal, so you will be able to […]

Raspberry Pi Tutorials:{Episode 2} Setting Up and Running in Headless Mode (Part A)

Hi guys, welcome to today’s tutorial, like it was established last time out these series of tutorial are to teach you everything you need to know about the raspberry pi.  Today’s tutorial will cover  installing an OS and setting up your Pi to use your PC (in my case windows 10 based) for display which is generally referred to as running the pi in headless mode. I will be using the raspbian Jesse as the […]

Raspberry Pi tutorials: Part 1 (The Introduction)

If you clicked on this then accept my warm welcome to the Makers party. These tutorial series which will be handled by the Geek in the neighborhood Clement Dike, will take you through everything raspberry pi, one tutorial at a time, so it doesn’t matter if you are a newbie to the world of making, or a grade A maker…the tutorial series has got something for everyone with great projects to automate stuffs in your […]